home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Skunkware 98
/
Skunkware 98.iso
/
src
/
interp
/
perl-5.003.tar.gz
/
perl-5.003.tar
/
perl-5.003
/
Makefile.SH
< prev
next >
Wrap
Makefile
|
1996-03-25
|
15KB
|
493 lines
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
elif test -f ../config.sh; then TOP=..;
elif test -f ../../config.sh; then TOP=../..;
elif test -f ../../../config.sh; then TOP=../../..;
elif test -f ../../../../config.sh; then TOP=../../../..;
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
case "$d_dosuid" in
*define*) suidperl='suidperl' ;;
*) suidperl='';;
esac
shrpenv=""
case "$d_shrplib" in
*define*)
patchlevel=`egrep '^#define[ ]+PATCHLEVEL' patchlevel.h \
| awk '{print $3}'`
case "$patchlevel" in
*[0-9]) plibsuf=.$so.$patchlevel;;
*) plibsuf=.$so;;
esac
if test "x$plibext" != "x" ; then plibsuf=$plibext d_shrplib=custom ; fi
case "$shrpdir" in
/usr/lib) ;;
"") ;;
*) shrpenv="env LD_RUN_PATH=$shrpdir";;
esac
pldlflags="$cccdlflags";;
*) plibsuf=$lib_ext
pldlflags="";;
esac
: Prepare dependency lists for Makefile.
dynamic_list=' '
for f in $dynamic_ext; do
: the dependency named here will never exist
base=`echo "$f" | sed 's/.*\///'`
dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
done
static_list=' '
static_ai_list=' '
for f in $static_ext; do
base=`echo "$f" | sed 's/.*\///'`
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
if test -f ext/$f/AutoInit.c; then
static_ai_list="$static_ai_list ext/$f/AutoInit.c"
fi
if test -f ext/$f/AutoInit.pl; then
static_ai_list="$static_ai_list ext/$f/AutoInit.pl"
fi
done
echo "Extracting Makefile (with variable substitutions)"
$spitshell >Makefile <<'!NO!SUBS!'
# Makefile.SH
# This file is derived from Makefile.SH. Any changes made here will
# be lost the next time you run Configure.
# Makefile is used to generate makefile. The only difference
# is that makefile has the dependencies filled in at the end.
#
#
!NO!SUBS!
$spitshell >>Makefile <<!GROK!THIS!
# I now supply perly.c with the kits, so don't remake perly.c without byacc
BYACC = $byacc
CC = $cc
LD = $ld
LDFLAGS = $ldflags
CLDFLAGS = $ldflags
SMALL = $small
LARGE = $large $split
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
RMS = rm -f
ranlib = $ranlib
# The following are mentioned only to make metaconfig include the
# appropriate questions in Configure. If you want to change these,
# edit config.sh instead, or specify --man1dir=/wherever on
# installman commandline.
bin = $installbin
scriptdir = $scriptdir
privlib = $installprivlib
man1dir = $man1dir
man1ext = $man1ext
man3dir = $man3dir
man3ext = $man3ext
# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
PLIBSUF = $plibsuf
SHRPENV = $shrpenv
dynamic_ext = $dynamic_list
static_ext = $static_list
ext = \$(dynamic_ext) \$(static_ext)
static_ext_autoinit = $static_ai_list
DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
libs = $libs $cryptlib
public = perl $suidperl utilities translators
shellflags = $shellflags
## To use an alternate make, set \$altmake in config.sh.
MAKE = ${altmake-make}
# These variables will be used in a future version to make
# the make file more portable to non-unix systems.
AR = $ar
EXE_EXT = $exe_ext
LIB_EXT = $lib_ext
OBJ_EXT = $obj_ext
PATH_SEP = $path_sep
FIRSTMAKEFILE = $firstmakefile
# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs
.SUFFIXES: .c \$(OBJ_EXT)
!GROK!THIS!
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
CCCMD = `sh $(shellflags) cflags $(perllib) $@`
private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
# Files to be built with variable substitution before miniperl
# is available.
sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
makedir.SH perl_exp.SH writemain.SH
shextract = Makefile cflags config.h makeaperl makedepend \
makedir perl_exp writemain
# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).
pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
addedbyconf = UU $(shextract) $(plextract) pstruct
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h
h = $(h1) $(h2) $(h3) $(h4)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c globals.c
c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) globals$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
# Once perl has been Configure'd and built ok you build different
# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
# make clean; make perllib=libperl<type>.a
# where <type> is some combination of 'd' and(or) 'e' or 'm'.
# See cflags to understand how this works.
#
# Eventually some form of 'make-a-perl' script will automate this
# together with linking a perl executable with any desired
# static modules.
perllib = libperl$(PLIBSUF)
lintflags = -hbvxac
# grrr
SHELL = /bin/sh
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
all: makefile miniperl $(private) $(plextract) $(public) $(dynamic_ext)
@echo " "; echo " Everything is up to date."
translators: miniperl lib/Config.pm FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
utilities: miniperl lib/Config.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(MAKE) all
# This is now done by installman only if you actually want the man pages.
# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
# Phony target to force checking subdirectories.
# Apparently some makes require an action for the FORCE target.
FORCE:
@sh -c true
# The $& notation tells Sequent machines that it can do a parallel make,
# and is harmless otherwise.
# The miniperl -w -MExporter line is a basic cheap test to catch errors
# before make goes on to run preplibrary and then MakeMaker on extensions.
# This is very handy because later errors are often caused by miniperl
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.
miniperl: $& miniperlmain$(OBJ_EXT) $(perllib)
$(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(perllib) $(libs)
@./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
miniperlmain$(OBJ_EXT): miniperlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
perlmain.c: miniperlmain.c config.sh makefile $(static_ext_autoinit)
sh writemain $(DYNALOADER) $(static_ext) > tmp
sh mv-if-diff tmp perlmain.c
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
# static extension Makefile's add to it.
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs
perl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
$(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
pureperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
quantperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
$(perllib): $& perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$d_shrplib" in
*define*)
$spitshell >>Makefile <<'!NO!SUBS!'
$(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
!NO!SUBS!
;;
custom)
if test -r $osname/Makefile.SHs ; then
. $osname/Makefile.SHs
$spitshell >>Makefile <<!GROK!THIS!
Makefile: $osname/Makefile.SHs
!GROK!THIS!
else
echo "Could not find $osname/Makefile.SH! Skipping target \$(perllib) in Makefile!"
fi
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f $(perllib)
$(AR) rcu $(perllib) perl$(OBJ_EXT) $(obj)
@$(ranlib) $(perllib)
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# checks as well as the special code to validate that the script in question
# has been invoked correctly.
suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
$(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
preplibrary: miniperl lib/Config.pm $(plextract)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
@./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
# Take care to avoid modifying lib/Config.pm without reason
lib/Config.pm: config.sh miniperl
./miniperl configpm tmp
sh mv-if-diff tmp lib/Config.pm
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
./miniperl minimod.pl > tmp && mv tmp $@
$(plextract): miniperl lib/Config.pm
./miniperl -Ilib $@.PL
install: all install.perl install.man
install.perl: all installperl
./perl installperl
install.man: all installman
./perl installman
# Not implemented yet.
#install.html: all installhtml
# ./perl installhtml
# I now supply perly.c with the kits, so the following section is
# used only if you force byacc to run by saying
# make run_byacc
# Since we patch up the byacc output, the perly.fixer script needs
# to run with precisely the same version of byacc as I use. You
# normally shouldn't remake perly.[ch].
run_byacc: FORCE
@ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
sh $(shellflags) ./perly.fixer y.tab.c perly.c
mv y.tab.h perly.h
echo 'extern YYSTYPE yylval;' >>perly.h
- perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
# made.
perly.c: perly.y
-@sh -c true
perly.h: perly.y
-@sh -c true
# The following three header files are generated automatically
# keywords.h: keywords.pl
# opcode.h: opcode.pl
# embed.h: embed.pl global.sym interp.sym
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
# make regen_headers
regen_headers: FORCE
perl keywords.pl
perl opcode.pl
perl embed.pl
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) will automatically
# get built. There should ordinarily be no need to change any of
# this part of makefile.
#
# The dummy dependency is a place holder in case $(dynamic_ext) or
# $(static_ext) is empty.
#
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl preplibrary FORCE
@sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
@sh ext/util/make_ext dynamic $@ LIBPERL_A=$(perllib)
s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
@sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
clean:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
rm -f perl.exp ext.libs
-rm perl.export perl.dll perl.libexp perl.map perl.def
-cd pod; $(MAKE) clean
-cd utils; $(MAKE) clean
-cd x2p; $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext clean $$x ; \
done
rm -f perl suidperl miniperl $(perllib)
realclean: clean
-cd os2; rm -f Makefile
-cd pod; $(MAKE) realclean
-cd utils; $(MAKE) realclean
-cd x2p; $(MAKE) realclean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext realclean $$x ; \
done
rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
rm -rf lib/auto
rm -f lib/.exists
rm -f h2ph.man pstruct
rm -rf .config
@echo "Note that make realclean does not delete config.sh"
clobber: realclean
rm -f config.sh cppstdin
distclean: clobber
# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.
lint: perly.c $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
# Need to unset during recursion to go out of loop
MAKEDEPEND = makedepend
$(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
config.h: config.sh
/bin/sh config_h.SH
# When done, touch perlmain.c so that it doesn't get remade each time.
depend: makedepend
sh ./makedepend
- test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
# Cannot postpone this until $firstmakefile is ready ;-)
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
test: miniperl perl preplibrary $(dynamic_ext)
- cd t && chmod +x TEST */*.t
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
minitest: miniperl
- cd t && chmod +x TEST */*.t
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
clist: $(c)
echo $(c) | tr ' ' '\012' >.clist
hlist: $(h)
echo $(h) | tr ' ' '\012' >.hlist
shlist: $(sh)
echo $(sh) | tr ' ' '\012' >.shlist
pllist: $(pl)
echo $(pl) | tr ' ' '\012' >.pllist
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
$eunicefix Makefile
case `pwd` in
*SH)
$rm -f ../Makefile
$ln Makefile ../Makefile
;;
esac
$rm -f $firstmakefile